Item Value setting Description
Time System data. Logged packet of the Date Time. Date time format ("Month"
"Day" "Hours":"Minutes":"Seconds")
Table 24 – Web Content Filter Status
Note – Ensure Web Content Filter Log Alert is enabled.
Refer to Security > Firewall > Web Content Filter tab. Check Log Alert and save the setting.
MAC Control Status
Figure 33 – MAC Control Status
Item Value setting Description
Activated
Control Rule
System data. This is the MAC Control Rule name.
Blocked MAC
Addresses
System data. This is the MAC address of the logged packet.
IP System data. The Source IP (IPv4) of the logged packet.
Time System data. The Date and Time stamp of the logged packet. Date & time
format. ("Month" "Day" "Hours":"Minutes":"Seconds")
Table 25 – MAC Control Status
Note – Ensure MAC Control Log Alert is enabled.
Refer to Security > Firewall > MAC Control tab. Check Log Alert and save the setting.
Application Filters Status
Figure 34 – Application Filters Status
Item Value setting Description
Filtered Application
Category
System data. The name of the Application Category being blocked.
Filtered Application
Name
System data. The name of the Application being blocked.
IP System data. The Source IP (IPv4) of the logged packet.
Time System data. The Date and Time stamp of the logged packet. Date & time
format. ("Month" "Day" "Hours":"Minutes":"Seconds")
Table 26 – Application Filters Status
To Next Page
Loading...