Configuration
Software Installation & Configuration
6-23
Procedure The procedure for configuring the General Configuration window is as follows.
Step 1. Enter the name of the hospital in the Institution Name field using the keyboard.
Step 2. For a Database Server, make the desired selections in the Database Server
Settings fields.
Step 3. For networked Information Centers and Clients, make the desired selections for this
device in the Local General Config Settings fields and type in any desired
Standby Messages in the boxes provided using the keyboard
Step 4. For an Information Center, make the desired selections for this device in the
Database Server Settings fields.
Step 5. Click Next> to save changes and advance to the next page.
Standby Messages Write up to 12 Standby Messages that can be selected in the Patient Window when the
Standby button is clicked. Each message can contain up to 15 characters.
Factory Default messages are:
Cathlab
Hemodialysis
Orthopedics
Pulmonary
X-Ray
Other
Type in the desired Standby Messages in the boxes provided using the keyboard. The
keyboard TAB key can be used to advance to the next message.
Field Description
To Next Page
Loading...
Need help?
General