Troubleshooting
7-146 Maintenance, Troubleshooting, and Repair
Step 7. Label the floppy disk and store it in a safe place for later availability.
To install the BIOS on the workstation:
Step 8. Insert the floppy disk created in Step 5 into the A:\ drive of the workstation.
Step 9. Turn the power to the workstation OFF and then ON.
When the boot up process has completed:
Step 10. Follow the instruction indicated on the display screen to install the BIOS.
Creating Server
BIOS Bootable
Floppy Disk
Follow these procedures to copy the BIOS onto a second floppy disk (for backup purposes):
Step 1. Insert the BIOS disk into the floppy disk drive.
Step 2. Go to the Desktop and open My Computer
Step 3. Click on the icon for the disk you want to copy from (e.g. 3.5” floppy, (A:)).
Step 4. Open the File menu and select Copy Disk
Step 5. Click Start, and follow the onscreen steps.
Step 6. When done, write protect the floppy disk, label it, and store in secure location.
Replaceable Parts Replaceable Parts for the Information Center system can be ordered from the Philips
Support Materials Organization. A complete list of orderable replaceable parts is given in
the Replaceable Parts List on the documentation CDROM. Also provided is the address
and telephone number of Philips Sales and Support Offices.
The components, options and accessories for Philips systems are given in Chapter 1,
Components and Options. These can also be ordered from the Support Materials
Organization.
To Next Page
Loading...
Need help?
General