Cables
Hardware Description
2-39
Cables
Equipment cables for Philips devices are of two general types, those that provide power and
those that carry communication signals. This section provides descriptions and drawings of
each cable. Detailed wiring diagrams for each Information Center model are provided in
Chapter 5, Installation.
Cable
Descriptions
Figure 2-40 shows equipment cables that are provided for Information Center systems. The
following table gives descriptions of each cable and a key to the figures.
Table 2-3. Equipment Cables for Information Center Systems
Key # Description Option Length (m) Length (ft)
1 Display power cable - (all displays)
2 Display signal cable - (all displays)
3 Female/Female VGA cable adapter
4 15 Pin Mini D-Sub Male to 5 BNC coax adapter cable A11 1.0 3.3
15 Pin Mini D-Sub Male to 5 BNC coax adapter cable A12 5.0 16.4
5 Video Splitter (2-way)
6 Video Splitter Power Supply (2-way)
7 5 BNC/5 BNC coax adapter cable A17 3.0 9.8
8 5 Male BNC connectors (for Plenum coax cable) J89
5 Male BNC connectors (for Non-plenum coax cable) J87
9 BNC Plenum coax cable P35 90 max. 300 max.
BNC Non-plenum coax cable C62/C63 90 max. 300 max.
10 Mouse or Trackball cable
11 Keyboard cable
Keyboard/Mouse extension cable A14 4.0 13.1
Extended distance cable kit (includes cables for display,
mouse, keyboard, and recorder rack)
A10 approx.
6.0
approx.
19.7
12 UPS signal cable to M3150 PC (option) A15 1.0 3.3
UPS signal cable to M3150 PC (standard) A16 2.0 6.6
13 PC power cable
14 LaserJet 6P printer signal cable (standard) A01 3.0 9.8
15 LaserJet printer power cable
16 SDN cable: wall box - PC (standard) A30 2.0 6.6
SDN cable: wall box - PC (option) A31 4.0 13.1
17 Analog telephone line - PC cable
18 Speaker cable 6.0 19.7
19 Recorder 60V Power Supply power cable
20 Recorder 60V Power Supply 0.5 1.5
21 Recorder Rack power/signal cable A33 1.0/3.0 3.3/9.8
Recorder Rack power/signal cable A34 1.0/6.0 3.3/19.7
To Next Page
Loading...
Need help?
General