Philips IntelliVue Series User Manual

Configuring the System
Start-up and Configuration
8-15
M3169 Small
Database
Server
Table 8-5 describes the test or inspection to perform for the M3169 Database Server for
each type of test specified in Table 8-2.
M3154
Database
Server
Table 8-5 describes the test or inspection to perform for the Database Server for each type
of test specified in Table 8-2.
Table 8-5. M3169 - Test and Inspection Matrix
Test Block
Name
Test or Inspection to Perform Expected Results
What to Record
on Service
Record
V
isual For installation, perform visual inspection of shipping
cartons and contents.
No visible damage V:P or V:F
where P = Pass
F = Fail
Power On: Power on all devices.
Observe software boot up.
After Self-Test, observe that DBS status LED is solid
green
Expected answers are
“Yes”.
If so, Power On test
passed.
PO:P or PO:F
where P = Pass
F = Fail
Performance: Verify purchased options are enabled.
Observe that all M3155 and M3151 Client Device
names configured on the DBS are displayed at the
bottom of the service screen with a status of Monitoring
Expected answers are
“Yes”.
If so, Performance test
passed.
P:P or P:F
where P = Pass
F = Fail
Table 8-6. M3154 - Test and Inspection Matrix
Test Block
Name
Test or Inspection to Perform Expected Results
What to Record
on Service
Record
V
isual For installation, perform visual inspection of shipping
cartons and contents.
No visible damage V:P or V:F
where P = Pass
F = Fail
Power On: Power on all devices.
Observe software boot up.
After Self-Test, observe that DBS status LED is solid
green
Expected answers are
“Yes”.
If so, Power On test
passed.
PO:P or PO:F
where P = Pass
F = Fail

Philips IntelliVue Series Specifications

General

Brand	Philips
Model	IntelliVue Series
Category	Server
Language	English