Configuration
6-48 Software Installation & Configuration
Notes
Bed Label, Unit, Branch #, and Equip. Label/Monitor Label are assigned in Equipment Setup.
For hardwired monitors, Bed Label and Equipment Label are the same.
For telemetry monitors, Bed Label and Equipment Label are different.
For M3/M4/IntelliVue monitors, Bed Label and Monitor Label are different.
Equipment Type Specifies whether the monitoring equipment is:
• Hardwired patient monitor fixed to a bed location or a mobile
• Telemetry monitor that can be assigned to patients from different beds
• M3/M4/IntelliVue Patient monitor
Monitored by Name of Information Center that is monitoring this device
Sector Number of the Patient Sector on the Main Screen where the patient monitoring data is
displayed.
Field Description
To Next Page
Loading...
Need help?
General