Patient Monitors
Introducing the IntelliVue Information Center System
1-15
Note M2350/60A CCMs (release B.03.13) that monitor telemetry with release 2.x cannot connect to
the same Serial Communications Controller (SCC) as Information Center systems (release C.0
and later).
The following Philips equipment is not compatible with Information Center systems.
Table 1-5. Information Center Non-Compatible PC/Server Models
TeleMon A.0 and later
Philips M2/M3/M4 Wired Monitor
M3/M4 Wireless Patient Monitor
M2/M3/M4 Measurement Server
M3046A
M3046A #J20
M3000A
D.0 and later
C.04 and later
E.0
Table 1-2. Patient Monitors Compatible with Software Rel. E.01 and EASI
Product Name Product Number
Software Release
Req’d for Rel. E.01
Software Release
Req’d for EASI
Table 1-3. Information Center Compatible Software
Product Name Software Release Req’d for Rel. E.01
TraceMaster A.04 and later
Holter 2.6 and later
Application Server A.01 and later
Emergin Wireless Office Alarm Messenger 5.0 or greater
Table 1-4. Information Center Non-Compatible Equipment
Product Name Product Number Software Release
Monitor Terminal 78534A/B/C all
Comprehensive Monitor Terminal 78532A/B all
Compact Configured Monitor 78352B, 78353A, 78354B all
Digital UHF Telemetry M1403A all Releases prior to E.01
SDN Arrhythmia System 78720A/B all
Central Monitor 78560 all
Patient Information Center 78501/502/504/508/509 all
Clinical Event Review M1251A all
Note: All Information Centers and Database Servers must be upgraded to the same Software Release
PC Model Number
Software Release
Rel. D.0
Software Release
Rel D.01
Software Release
Rel E
Software Release
Rel E.01
D4796N Kayak XA Not supported Not supported Not supported Not supported
D4354N Vectra XU Not supported Not supported Not supported Not supported
D4367N Vectra XU Supported Not supported Not supported Not supported
D4692N Kayak XU Supported Not supported Not supported Not supported
To Next Page
Loading...
Need help?
General