Risco ProSYS series - Page 220

220 ProSYS Installation and Programming Manual
EVENT MESSAGE DESCRIPTION
GSM:SIM
TROUBLE
SIM Card missing or not properly placed.
GSM:TAMPER
GSM box tamper condition
GSM:TAMPER
OK
GSM/GPRS Box tamper restore
HOM:P=X C=YY
Partition X is armed in Stay mode by user YY
HOME:P=X
WB=YY
Partition X is home armed using keyfob YY
IR RESTORE
Z=XXX
Trouble restore in the IR channel of BUS zone XXX
IR TROUBLE
Z=XXX
Trouble in the IR channel of BUS zone XXX
JAMM. WBA=X
Jamming in wireless keyfob expander ID=X
JAMMING ZE=X
Wireless jamming from zone expander ID=X
KSW A:Z=XXX
P=Y
Group A in partition Y is armed by keyswitch zone XXX
KSW
ARM:Z=XXX P=Y
Partition Y is armed by keyswitch zone XXX
KSW B:Z=XXX
P=Y
Group B in partition Y is armed by keyswitch zone XXX
KSW C:Z=XXX
P=Y
Group C in partition Y is armed by keyswitch zone XXX
KSW D:Z=XXX
P=Y
Group D in partition Y is armed by keyswitch zone XXX
KSW DIS:Z=XXX
P=Y
Partition Y is disarmed by keyswitch zone XXX
L.BAT RSTR
WB=XX
Low battery trouble restored from wireless keyfob XX
LB RSTR Z=XXX
Low battery restore from wireless zone XXX
LOST Z=XXX
Wireless zone lost, zone XXX
LOW BAT PS=X
Low battery trouble from power supply ID=X
LOW BAT RS
S=X
Low battery trouble restore from siren ID=X
LOW BAT
SIREN=X
Low battery trouble from siren ID=X
LOW BAT
WB=XX
Low battery trouble from wireless keyfob XX
LOW BAT Z=XXX
Low battery trouble from wireless zone XXX
MAIN BELL RS
Bell trouble restore in Main Panel
MAIN:AC RSTR
AC power restore on Main Panel
MAIN:AUX RST
Restore of Aux power on Main Panel