Strasbaugh Universal Vacuum System
Page 18 Version 1.2—March 2004
CONNECTIONS
Figure 1-3 Gauges and Connections
ELECTRICAL IN
Electrical connections are dependent upon equipment configurations. Only qualified
electricians, who are familiar with this equipment and their facilities, should perform
installation.
Since electrical connections vary from site to site, the vacuum system is NOT supplied with
a “pigtail” power cable or plug. A qualified electrician must wire the power directly into
the Universal Vacuum System electrical enclosure.
See electrical schematics 289001E1and 289001E2 for specifications.
To Next Page
