STRASBAUGH, INC.
4-2 February 19, 2002 7AF SECS/GEM Interface Ver. 1.9
Strasbaugh Confidential
S5F3 S5F4 4,5 Enable/Disable Alarm
S5F5 S5F6 4,5 List Alarms
S5F7 S5F8 4,5 List Enabled Alarms E
S6F15 S6F16 4,5 Request Event Report
S6F17 S6F18 4,5 Request Annotated Event Report E
S6F19 S6F20 4,5 Request Report
S6F21 S6F22 4,5 Request Annotated Report E
S6F23 S6F24 4,5 Request Spooled Data
S7F1 S7F2 4,5 Process Program Inquire/Grant
S7F3 S7F4 4,5 Unformatted Process Program Send
S7F5 S7F6 4,5 Unformatted Process Program Request
S7F17 S7F18 4,5 Process Program Delete
S7F19 S7F20 4,5 Process Program Directory
S10F3 S10F4 4,5 Terminal Display, Single
S10F5 S10F6 4,5 Terminal Display, Multiple
S10F9 S10F10 4,5 Broadcast E
4.2 Equipment to Host
This section describes primary SECS messages sent by the Equipment, and the associated reply messages from the Host.
In the column headed "Notes", those messages marked with "E" are extensions beyond GEM. Those messages marked with
"N" are provided for non-GEM or older GEM compatibility.
Primary Reply Description Notes
-- (any) SnF0 Primary rejected while Off-Line
S1F1 S1F2 Are You There
S1F13 S1F14 Connect Request
S1F65 S1F66 Connect Request N
S2F17 S2F18 Date and Time Request
S5F1 S5F2 Alarm Report N
S5F71 S5F72 Alarm Report Block Send
S5F73 S7F74 Alarm Notification Send
S6F1 S6F2 Trace Data Send
S6F3 S6F4 Annotated Event Report Send N
S6F5 S6F6 Multi-Block Data Send Inquire/Grant
S6F9 S6F10 Event Report Send N
S6F11 S6F12 Event Report Send
S6F13 S6F14 Annotated Event Report Send N
S7F1 S7F2 Process Program Inquire/Grant
S7F3 S7F4 Unformatted Process Program Send
S7F5 S7F6 Unformatted Process Program Request
S9F1 -- Error, Device ID
S9F3 -- Error, Stream
S9F5 -- Error, Function
S9F7 -- Error, Data
S9F9 -- Error, Transaction Timeout
S9F11 -- Error, Data Too Long
S10F1 S10F2 Terminal Request
To Next Page
