EasyManua.ls Logo

Strasbaugh nTellect 7AF - Page 1457

Default Icon
2493 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
STRASBAUGH, INC.
7AF SECS/GEM Interface Ver. 1.9 February 19, 2002 5-7
Strasbaugh Confidential
5-7
5.2.1.1 CONTROL STATE TRANSITIONS
Certain state transitions will cause a collection event to be signaled. If the event is enabled, this event will be sent to the
Host along with the appropriate reports if appropriate. This table lists the state transitions and notes when events will be
sent to the Host.
# From Trigger To Description
1
Unknown
Power-Up
Conditional This transition is made to either the Off-
Line or On-Line state, depending on the
EC INITCONTROLSTATE (VID 41).
2
Unknown
Power-Up
Conditional
This conditional transition is governed by
the value of the OFFLINESUBSTATE EC
(VID 42).
3
Equipment
Off-Line
Operator requests to
go On-Line
Attempt On-
Line
The 7AF will immediately send an S1F1
to request to go On-Line.
4
Attempt On-
Line
Unsuccessful On-
Line request
Conditional
This transition occurred because the Host
did not reply to an S1F1 with an S1F2 or
because the S1F1 was not successfully
sent.
5
Conditional
ONLINEFAILED
Equipment Constant
configured to
Equipment Off-Line.
Equipment
Off-Line
Equipment will allow the operator to
attempt to go On-Line again.
6
Conditional
ONLINEFAILED
Equipment Constant
configured to Host
Off-Line.
Host Off-Line
The 7AF will accept a Host initiated
request to go On-Line by replying to the
S1F17 with ONLACK = 0x00.
7
Host Off-Line Operator requests to
go Off-Line
Equipment
Off-Line
A Host request to go On-Line will not be
accepted.
8
Attempt On-
Line
Successful On-Line
request.
On-Line
The Equipment is now On-Line.
9
On-Line
Host puts the
Equipment Off-Line
by sending S1F15
and receiving the
S1F16 with
OFLACK = 0x00.
Host Off-Line
EVENT: GemControlStateOFFLINE
(CEID 5002). The 7AF will accept a Host
initiated request to go On-Line by replying
to the S1F17 with ONLACK = 0x00.
10
Host Off-Line
Successful
completion of
S1F17 / S1F18
transaction, with
ONLACK = 0x00.
On-Line
The Equipment is now On-Line.
11
Unknown
Entry into On-Line
super-state.
Conditional
(Local or
Remote)
EVENT: GemControlStateLOCAL (CEID
13) or GemControlStateREMOTE (CEID
14). The 7AF will transition to whichever
state is specified in the EC ONLINE-
SUBSTATE (VID 44).
12
Local
Operator or Host
requests to go
Remote.
Remote
EVENT: GemControlStateREMOTE
(CEID 14). All documented messages
will be accepted in this state, including
remote commands.

Table of Contents

Related product manuals