Strasbaugh nTellect 7AF - Page 1522

STRASBAUGH, INC.
6-32 February 19, 2002 7AF SECS/GEM Interface Ver. 1.9
Strasbaugh Confidential
<L
<L [2]
<U4 VID> * Variable ID
<V> * Variable Value
>
...
>
>
...
>
> .
Note: This message is provided only for compatibility with older Host computers which support older versions of GEM.
(See section 2.7.2, "Gem Configuration".)
A Collection Event has occurred at the Equipment. The Host has enabled event reporting for this CEID (see S2F37). The
Host has set the Equipment Constant RpType to "True" (Annotated report format desired). The Equipment Constant
ConfigEvents has been set to 1. The Equipment sends one or more Event Reports which the Host has previously linked to
that CEID (see S2F35). Each report contains specific Variables which the Host has previously defined for that Report
(see S2F33).
The Equipment generates a value for DATAID to uniquely identify this Conversation. If S6F11 is multiblock, the
Equipment first sends the S6F5/S6F6 Inquire/Grant transaction, and the DATAID in S6F11 will match DATAID in S6F5.
If the CEID is enabled, but no Reports are linked to this CEID, S6F11 has the following special format:
S6F13 W * H<-E
<L [3]
<U4 DATAID> * DATAID
<U4 CEID> * Collection Event ID
<L>
> .
6.72 S6F14 - Annotated Event Report Acknowledge
S6F14 * H->E
<B [1] 00> . * ACKC6
The Host acknowledges the Event Report. The Equipment ignore ACKC6.
6.73 S6F15 - Event Report Request
S6F15 W * H->E
<U4 CEID> . * Collection Event ID
The Host sends the CEID of interest, requesting normal format reports.
6.74 S6F16 - Event Report Data
S6F16 * H<-E, Multiblock
<L [3]
<U4 DATAID> * DATAID
<U4 CEID> * Collection Event ID
<L
<L [2]
<U4 RPTID> * Report ID
<L
<V> * Variable Value
...