Strasbaugh nTellect 7AF - Page 1521

STRASBAUGH, INC.
7AF SECS/GEM Interface Ver. 1.9 February 19, 2002 6-31
Strasbaugh Confidential
6-31
<B [1] 00> . * ACKC6
The Host acknowledges the Event Report. The Equipment ignores ACKC6.
6.69 S6F11 - Event Report Send
S6F11 W * H<-E
<L [3]
<U4 DATAID> * DATAID
<U4 CEID> * Collection Event ID
<L
<L [2]
<U4 RPTID> * Report ID
<L
<V> * Variable Value
...
>
>
...
>
> .
This message is the "normal" message that the Equipment uses to report events. In order for this message to be used, the
Equipment Constant "ConfigEvents" must be set to "1".
A Collection Event has occurred at the Equipment. The Host has enabled event reporting for this CEID (see S2F37). The
Host has set the Equipment Constant RpType to "False" (normal report format desired). The Equipment sends one or
more Event Reports which the Host has previously linked to that CEID (see S2F35). Each report contains specific
Variables which the Host has previously defined for that Report (see S2F33).
The Equipment generates a value for DATAID to uniquely identify this Conversation. If S6F11 is multiblock, the
Equipment first sends the S6F5/S6F6 Inquire/Grant transaction, and the DATAID in S6F11 will match DATAID in S6F5.
If the CEID is enabled, but no Reports are linked to this CEID, S6F11 has the following special format:
S6F11 W * H<-E
<L [3]
<U4 DATAID> * DATAID
<U4 CEID> * Collection Event ID
<L>
> .
6.70 S6F12 - Event Report Acknowledge
S6F12 * H->E
<B [1] 00> . * ACKC6
The Host acknowledges the Event Report. The Equipment ignores ACKC6.
6.71 S6F13 - Annotated Event Report Send
S6F13 W * H<-E, Multiblock
<L [3]
<U4 DATAID> * DATAID
<U4 CEID> * Collection Event ID
<L
<L [2]
<U4 RPTID> * Report ID