Strasbaugh nTellect 7AF - Page 1524

STRASBAUGH, INC.
6-34 February 19, 2002 7AF SECS/GEM Interface Ver. 1.9
Strasbaugh Confidential
6.76 S6F18 - Annotated Event Report Data
S6F18 * H<-E
<L [3]
<U4 DATAID> * DATAID
<U4 CEID> * Collection Event ID
<L
<L [2]
<U4 RPTID> * Report ID
<L
<L [2]
<U4 VID> * Variable ID
<V> * Variable Value
>
...
>
>
...
>
> .
The Equipment sends one or more Event Reports which the Host has previously linked to that CEID (see S2F35). Each
report contains specific Variables which the Host has previously defined for that Report (see S2F33).
This message occurs whether or not the Host has enabled event reporting for this CEID (see S2F37), and regardless of
how the Host has set up the Equipment Constant RpType (report format).
The Equipment generates a meaningless value for DATAID.
CEID contains the CEID specified in S6F17.
If the CEID specified in S6F17 is invalid, or if no reports are linked to this CEID, this message has the following format:
S6F18 * H<-E, Multiblock
<L [3]
<U4 DATAID> * DATAID
<U4 CEID> * Collection Event ID
<L>
> .
6.77 S6F19 - Request Report Request
S6F19 W * H->E
<U4 RPTID> . * Report ID
The Host requests a Report for the specified RPTID.
6.78 S6F20 - Request Report Data
S6F20 * H<-E, Multiblock
<L
<V>
...
> .
The Equipment sends the Report.
If no report is defined for the RPTID in S6F19, S6F20 has the following special error format: