Strasbaugh nTellect 7AF - Page 20

Strasbaugh Table of Contents
Menu Information Locator
The table below lists the 7AF software menus alphabetically together
with the location(s) in the Operation and Maintenance manual at
which detailed information for each may be found.
Menu
Where to Find Details - Manual
Location(s)
DRESS CYCLE MENU • Ch. 8 - Operator Functions
GRIND CYCLE MENU • Ch. 8 - Operator Functions
HOME (MACHINE) MENU • Ch. 8 - Operator Functions
MACHINE MAINTENANCE MENU • Ch. 12 - Software Calibration
MACHINE (CALIBRATION) SETUP
ENTRY MENU
• Ch. 12 - Software Calibration
MAIN MENU • Ch. 8 - Operator Functions
OUTPUT CONTROL/INPUT STATUS
MENU
• Ch. 12 - Software Calibration
WAFER RECIPES MENU • Ch. 9 - Machine Setup
WHEEL AND CHUCK RECIPES
MENU
• Ch. 9 - Machine Setup
TOC - 18 Version 1.2 - June 2004