Operations and Maintenance Manual Mechanical Maintenance Procedures
Version 1.2 - June 2004 11 - 41
5. To make corrections, adjust--either one or both--the upper right spindle side
to side adjusting screw and the upper right spindle front to rear adjusting
screw:
Side to Side
a. Locate the upper right spindle side to side adjusting screw, a two-pitch
screw extending horizontally from the side of the upper right spindle
assembly.
Notes:
Access the adjusting screw through the door 15 opening.
The screw is labeled for easy identification.
b. Using a 3/4-in. open end wrench, rotate the screw as needed to meet the
goal.
Rotate the screw clockwise to lower the left side (as viewed from the front
of the machine) of the grind wheel.
To Next Page
Loading...
