Strasbaugh nTellect 7AF - Page 486

Strasbaugh nTellect (Model 7AF) Wafer Grinder
13 - 26 Version 1.2 - June 2004
3. At the Output Control/Input Status menu, exercise the cylinder:
Touch to Select Explanation/Screen Display
a. Machine Maint At the Main Menu screen, touch the "Machine
Maint" button to select the Machine
Maintenance menu.
Displays:
Machine Maintenance menu
b. Inputs/Outputs At the Machine Maintenance menu screen, touch
the "Inputs/Outputs" button to select the Output
Control/Input Status menu.
Displays:
Output Control/Input Status menu
c. Spin/Rinse Station
icon Touch the "Spin/Rinse Station
icon", located in the Output Control section of
the menu, to display the Spin Station drop down
menu.
d. Lid UP/DOWN Touch the "Lid UP/DOWN" button until Lid
UP is displayed.
e. Lid UP/DOWN Touch the "Lid UP/DOWN" button until Lid
DOWN is displayed.