Operations and Maintenance Manual Physical Description
Version 1.2 - June 2004 3 - 19
EMERGENCY OFF BUTTONS
The 7AF is equipped with two EMERGENCY OFF push buttons, one on the control
panel above the monitor and one at the rear of the machine in the door of the
disconnect enclosure.
After pressing an EMERGENCY OFF button, the operator restarts the machine from
the beginning by pressing the MACHINE ON
push button.
To restart after correcting the problem requiring the emergency off, close all doors,
and follow the procedures in the Operator Functions chapter of this manual for
powering up the machine, homing, and running an auto cycle.
For further information on emergency off, cycle halting, and cycle interruption, see the
Operator Functions and Troubleshooting chapters of this manual.
To Next Page
Loading...
