D950/Vista Digital Mixing System
4-10 GC Operation SW V3.3 Date printed: 05.08.03
4.2.2 The Status Bar
The Status Bar has two functions:
• Displaying system information;
• Short on-line help information.
Status information is displayed in the Status Bar continually. It is espe-
cially helpful to view the Status Bar during startup of the D950/Vista sys-
tem, because various information regarding the boot process and system
parts will be displayed on the monitor screen.
“Ready” in the Status Bar indicates that everything within the D950/Vista
is working satisfactorily. Check Status will be displayed if there is some-
thing wrong with the system (specifically, a red circle appears in the Sur-
veyor button, refer to chapter 4.8 for more information), and sometimes
during system booting (which is normal).
If you move the cursor over a specific item in the toolbar, on-line help
information will be displayed. The information displayed describes the ba-
sic function of the selected tool.
To Next Page
Loading...
Need help?
General
