D950/Vista Digital Mixing System
Date printed: 05.08.03 SW V3.3 GC Operation 4-79
4.5.3 Channel Selection Tool
This tool allows one console Channel to be selected for control of various
centralized functions on the Graphic Controller, such as Channel Patch.
There are three arrow buttons:
Selects the previous channel from the list;
Selects the next channel from the list;
Opens the full Channel List to select a channel. Labels are displayed ac-
cording to the selected Label Mode (refer to chapter 4.3.3).
To Next Page
Loading...
Need help?
General
