Studer D950 User Manual

D950/Vista Digital Mixing System
4-76 GC Operation SW V3.3 Date printed: 05.08.03
4.5.2.1 Tools: Machine Control Window
The Machine Control window can only be displayed if the TC2 or TC3
timecode options are installed.
Click on this icon to open the machine control window.
The Machine Control window allows simple machine control functions to
be operated from the GC screen. The basic machine control functions are
also available from the Control Surface panel (except for Vista 6).
The Machine Control window is always positioned on the top level of
display of the windows of the GC. Much of the window’s operation is de-
pending on the settings of the Options/TC-Reader/Generator menu. Refer
to chapter 4.5.2.1.1 for details.
TC Reported from
9-Pin Machine
Transport Controls
Timecode for LOC, Goto/Loop Start
or DROP-IN
Click here for Cue List
Selection Menu
Locator Key
Goto Key
Loop Key
Timecode for Loop End or Drop Out
Loop Mode Setting
Click here for Cue List
Selection Menu

Studer D950 Specifications

General

Brand	Studer
Model	D950
Category	Music Mixer
Language	English