D950/Vista Digital Mixing System
Date printed: 05.08.03 SW V3.3 ConfigTool 7-47
7.5 Maintenance
7.5.1 Managing the Files – Which File is Where?
Any Session Configuration starts with only two files:
• myConfig.vmc
• myConfig.cor
They are stored in a subfolder (with the name of the configuration) of the
Session Configuration folders on the Studer D950/Vista PC.
7.5.2 The D950CfgTool.ini File
The :\Windows_Root directory contains the “D950CfgTool.ini” file.
This file tells the Configuration Tool where to look for various compo-
nents and what the basic settings are. This root directory may be called
similarly to “Windows”, “Win95”, or “WINNT40” and is usually found on
the C: drive of every PC.
The contents of this file are set by the Session Configuration Tool soft-
ware. The user should not find it necessary to edit the file using a text
editor.
This file is automatically generated if there is none available upon starting
the Configuration Tool for the first time.
7.5.2.1 Example of a Core Knowledge File
The Core Knowledge file offers the following information on a Configu-
ration.
VMC ID Identification of the VMC used to ensure that the *.vmc and *.cor files
match.
Sampling Frequency 48 kHz or 96 kHz
Tasks Shows the task (channels, buses….) of the configuration.
D950CfgTool.ini A copy of the *.ini file used to generate the configuration.
Resources List which task is being executed on which board and processor.
(Please turn page)
To Next Page
Loading...
Need help?
General
