Studer D950 User Manual

D950 Digital Mixing System
6-4 System Administration SW V3.3 Date printed: 05.12.03
6.1.1 Configurations
Adi_DSP: No user access. Contains files used to generate new configurations.
D950Cfg: Contains the configuration editor and all its files. Includes a log
file.
D950SystemDB: Contains all configurations.
Config1: This directory represents a configuration (e.g. Config1), using a
number of DSP cards to make a predefined console working. Two
of the included files are needed in order to run the configuration on
a real console: *.vmc and *.cor.
Config1.vmc: This file describes the structure of the console and all its parame-
ters.
Config1.cor: This file contains the DSP code for the core.
Config1.ckf: This is a text file that can be opened e.g. with the windows “note-
pad” application. It contains information on which parts of the con-
sole are currently running on which DSP card.
Anyname.pre: This is a preset file storing the same information as a snapshot file.
However, this file is read-only for the normal user and that it exists
once per configuration (therefore it is available across all titles
belonging to one configuration). The system administrator has ac-
cess rights for creating, deleting or modifying a preset file.
_ _DeviceLabels.pre: This is a preset file with a reserved name. It has the format of a
standard preset file and basically contains the same information. If
the “Use Device Labels” option is switched on, this file is read
whenever a title is opened, with its patch USER labels interpreted
as DEVICE LABELS. This means: When opening a title with the
“Use Device Labels” option activated, the USER label of this file
will overwrite the INHERITED labels (device labels) of the
opened title.
lastknownsession.ini: Stores information on the last used configuration and title when
closing the application software.
6.1.2 WinNT
All listed *.dll files must be located in the System32 directory.
D950System.ini Main *.ini file. It stores:
• The hardware configuration (which components are present,
and which RS422 port is used for what purpose)
• System administrator password
• Maximum mix file size
• 9-pin settings:
Whether ADR commands should be done by the machine con-
troller internally, or whether the console should do them (risk of
being slightly inaccurate)
Whether the machine should stop looping after having recorded
with auto record once
Whether to send no record commands at all, edit on/off, or
“crash record”
Whether it is allowed to cross the time code address 0:00:00:00
when working with offsets and locating.
D950CfgTool.ini No user access!
Adi_DSP
D950Cfg
D950SystemDB
Config1
old
Config1.vmc
Config1.cor
Config1.ckf
Anyname.pre
__DeviceLabels.pre
Config1.vmc
Config1.cor
Config.ckf
lastknownsession.ini
WinNT
D950System.ini
D950CfgTool.ini
System32
psapi.dll

Studer D950 Specifications

General

Brand	Studer
Model	D950
Category	Music Mixer
Language	English