D950/Vista7 Digital Mixing System
Date printed: 27.08.03 SW V3.3 AutoTouch+ 5-71
trol. At the moment the control is released, it punches out of RECORD but
remains in HELD status.
Both Global Touch Record and Global Touch Hold active:
4a - While keeping the AUTO / AUTO MODE key pressed, touching a control in
ENABLE mode will not punch into RECORD. The control will remain in
HELD status.
4b - A control being in RECORD status can be punched out by keeping the
AUTO / AUTO MODE key pressed, then touching and untouching the con-
trol. At the moment the control is released, it punches out of RECORD
while remaining in HELD status.
5.7.6.1.2 Option Modified Un-Touch Inverts <Touch Hold>
Both Global Touch Record and Touch Hold inactive:
5a - While keeping the AUTO / AUTO MODE key pressed, touching a control in
ENABLE mode will switch it to RECORD and HELD status. When re-
leasing the control it will remain in RECORD and TOUCHED.
Global Touch Record active, Touch Hold inactive:
6a - While keeping the AUTO / AUTO MODE key pressed, touching a control in
ENABLE mode will switch it to HELD but not to RECORD status, if the
control is released before the AUTO / AUTO MODE key.
6b - While keeping a control in ENABLE mode touched, press the AUTO /
AUTO MODE key. Then release the control before releasing the AUTO /
AUTO MODE key, causing the control to switch to RECORD and HELD
status.
Global Touch Record inactive, Touch Hold active:
7a - While keeping the AUTO / AUTO MODE key pressed, touching a control in
ENABLE mode will switch it to RECORD but not to HELD mode, if the
control is released before the AUTO / AUTO MODE key.
Both Global Touch Record and Touch Hold active:
8a - While keeping the AUTO / AUTO MODE key pressed, touching a control in
ENABLE mode will not punch the control into RECORD. When releasing
the control while the AUTO / AUTO MODE key is still pressed, the control
will not jump back to the replay value.
8b - A control being in RECORD can be punched-out by pressing the AUTO /
AUTO MODE key, then touching the control and releasing it while the
AUTO / AUTO MODE key is still pressed. At the same time the control’s
HELD status is cleared.