D950/Vista Digital Mixing System
4-114 GC Operation SW V3.3 Date printed: 05.08.03
4.7.2 SysAdmin: Surveyor
Surveyor: This action will open the Surveyor, which is used to check the status of the
D950/Vista system. Refer to chapter 4.8.
4.7.3 SysAdmin: Show VMC Tree
This feature is primarily used in troubleshooting and typically does not
have a use in normal operation.
Show VMC Tree: This action will bring up the VMC tree View. This page will display a list
of all channels, inputs, outputs, buses, and other system elements that are
defined within the current Session Configuration. Double-clicking on one
of these items will display the contents of that item’s branch. Opening of
subsequent branches will take further and further inside the VMC tree. If
the item has a changeable parameter, such as EQ high frequency, that pa-
rameter may be controlled directly from the VMC tree.
4.7.4 SysAdmin: Desk (D950 Only)
The Desk menu item contains several functions regarding the control desk:
Message to Desk Node: This function will bring up the Desk Common Msg entry box;
Reset Desk Nodes: This function will re-initialize the desk’s control nodes and then reload the
data needed for operation;
Reload Desk Nodes: This function will reload data for the desk’s control nodes without re-
initialization;
Update Desk Display: This function will refresh the desk’s display with the current data from the
PC.
To Next Page
Loading...
Need help?
General
