D950/Vista Digital Mixing System
Date printed: 05.08.03 SW V3.3 ConfigTool 7-15
7.3.2 Generate the D950/Vista Configuration Files
In this chapter, a simplified but complete configuration exercise is de-
scribed. The example *.vmc file will be used as the starting point and
modified. A DSP core file will be generated. You will need to start the
Session Configuration Tool first.
Open the File Use the “File/Open” menu or the “open folder” icon in the toolbar to open
a *.vmc file.
Save VMC as... To keep the original file intact, use the “Save VMC as...” command from
the File menu. Note that you do not have to type the extension .vmc. A
new folder and a new *.vmc file will be automatically created.
View the Configuration Use the “View/Channel Bus” command from the menu bar to display the
configuration contents. You may want to maximise the window in order to
see all the components.
This is a display of all the configured channel types and numbers and all
the configured summing buses as well as their interconnections:
Which Channels go
to which Buses?
Add new
Summing Buses
Add new
Channels
Summing Bus
types & Numbers
Channel types
& Numbers
To Next Page
Loading...
Need help?
General
