D950/Vista Digital Mixing System
7-14 ConfigTool SW V3.3 Date printed: 05.08.03
7.3.1.2 Start from Scratch
It is sometimes handy to find out how many DSP boards would be needed
for a certain configuration. You can always configure the mixing console
of any description by starting with an empty (New) *.vmc file. For this,
you will use the File/New menu. The approach of starting from scratch
will be useful if you do not have to modify an existing console, but are
really starting a new project.
The first thing you need to do is selecting the sample frequency. The de-
fault value is 48 kHz. The buttons on the toolbar show the selected value.
F Tip If you want the new configuration to really run on your existing console,
you need to be careful to think of all the elements of a configuration –
channel numbers and types, summing buses, I/O configuration, shared
functions, etc. Otherwise your new configuration may not be able to be
loaded properly on an existing console.
To Next Page
Loading...
Need help?
General
