D950/Vista7 Digital Mixing System
Date printed: 27.08.03 SW V3.3 AutoTouch+ 5-185
5.21.2 Control Mode Options
Channel Auto-Mode Button: <Order>: This list selects which Control Modes will be selected by press-
ing the AUTO MODE key, and in what order. All four Control Modes may
be selected or not in whatever order is desired.
<Affects>: This set of radio buttons determines which controls within the
channel will be affected by the AUTO MODE key when it is used to set
Control Modes.
• <Pre-selector Objects>: The state of the Control Mode Pre-Selectors
determine which controls will be affected by the AUTO MODE key when
it is used to set Control modes.
• <Fader>: The AUTO MODE key only affects the fader of the channel.
• <Mute>: The AUTO MODE key only affects the mute of the channel.
• <Fader and Mute>: The AUTO MODE key only affects the fader and
mute of the channel.
When Mix Status is Set to On: This set of radio button controls what happens when the Mix On mode is
selected and unselected (turned on and off)…
• <Maintain Object Modes>: In this case turning MIX ON, on and off,
will not change the control modes of any of the controls in the console.
• <Set All to Read>: In this case turning MIX ON, on, after having turned
it off, will set all controls to READ.
• <Set All to Read>: In this case turning MIX ON, on, after having turned
it off, will set all controls to READ.
To Next Page
Loading...
Need help?
General
