Studer D950 - Master Panel

D950/Vista7 Digital Mixing System
5-190 AutoTouch+ SW V3.3 Date printed: 27.08.03
5.21.5 Master Panel
This option page allows you to over-ride certain settings of the system that
are normally controlled by the AutoTouch+ Panel. This allows for the
AutoTouch+ Panel to control functions for certain types of controls while
allowing other types of controls to remain in specific modes or be blocked
by them.
Touch Hold: Faders/Encoders:
<Follows Panel>: Faders and Encoders (knobs) will follow the settings of
the AutoTouch+ panel in regards to Touch Hold.
<On>: Faders and Encoders (knobs) will always be in Touch Hold mode
regardless of the settings of the AutoTouch+ Panel.
<Off>: Faders and Encoders (knobs) will never be in Touch Hold mode
regardless of the settings of the AutoTouch+ Panel.
Switches:
<Follows Panel>: Switches (keys) and Selectors (keys or knobs) will fol-
low the settings of the AutoTouch+ panel in regards to Touch Hold.
<On>: Switches (keys) and Selectors (keys or knobs) will always be in
Touch Hold mode regardless of the settings of the AutoTouch+ Panel.
<Off>: Switches (keys) and Selectors (keys or knobs) will never be in
Touch Hold mode regardless of the settings of the AutoTouch+ Panel.