D950/Vista7 Digital Mixing System
Date printed: 27.08.03 SW V3.3 AutoTouch+ 5-191
Touch Record: Faders/Encoders:
<Follows Panel>: Faders and Encoders (knobs) will follow the settings of
the AutoTouch+ panel in regards to Touch Record.
<On>: Faders and Encoders (knobs) will always be in Touch Hold mode
regardless of the settings of the AutoTouch+ Panel.
<Off>: Faders and Encoders (knobs) will never be in Touch Hold mode
regardless of the settings of the AutoTouch+ Panel.
Switches: <Follows Panel>: Switches (keys) and Selectors (keys or knobs) will fol-
low the settings of the AutoTouch+ panel in regards to Touch Record.
<On>: Switches (keys) and Selectors (keys or knobs) will always be in
Touch Hold mode regardless of the settings of the AutoTouch+ Panel.
<Off >: Switches (keys) and Selectors (keys or knobs) will never be in
Touch Hold mode regardless of the settings of the AutoTouch+ Panel.
Extend Back To Begin Time: Faders/Encoders:
<Follows Panel>: Faders and Encoders (knobs) will follow the settings of
the AutoTouch+ panel in regards to Extend Back To Begin Time.
<Off>: Faders and Encoders (knobs) will be blocked from entering Extend
Back To Begin Time regardless of the settings of the AutoTouch+ Panel.
Switches:
<Follows Panel>: Switches (keys) and Selectors (keys or knobs) will fol-
low the settings of the AutoTouch+ panel in regards to Extend Back To
Begin Time.
<Off>: Switches (keys) and Selectors (keys or knobs) will be blocked from
entering Extend Back To Begin Time regardless of the settings of the
AutoTouch+ Panel.
Extend Back To Punch-In: Faders/Encoders:
<Follows Panel>: Faders and Encoders (knobs) will follow the settings of
the AutoTouch+ panel in regards to Extend Back To Punch-In.
<Off>: Faders and Encoders (knobs) will be blocked from entering Extend
Back To Punch-In regardless of the settings of the AutoTouch+ Panel.
Switches:
<Follows Panel>: Switches (keys) and Selectors (keys or knobs) will fol-
low the settings of the AutoTouch+ panel in regards to Extend Back To
Punch-In.
<Off>: Switches (keys) and Selectors (keys or knobs) will be blocked from
entering Extend Back To Punch-In regardless of the settings of the Auto-
Touch+ Panel.
Extend Back To Punch-In Selects In many cases it is desirable to audition a level and have that final deter-
Write to Punch-out: mined level be written from the punch-in to the punch-out time. This is
sometimes referred to as writing to a region. In AutoTouch+ this is accom-
plished by setting both the Extend Back To: Punch-In as well as Write To:
Punch Out. Because this combination is selected so often, this options
automatically selects Write To: Punch-Out whenever Extend Back To:
Punch-In is selected. It is simply a convenience and ensure that when you
wish to write to a punch-in/out region it is set properly. If you wish to set
Extend Back to Punch-In with a different Write To selection you can sim-
ple select a different Write To selection after Extend Back to Punch-In has
been selected (or do not set this option).
To Next Page
Loading...
Need help?
General
