Studer D950 User Manual

D950/Vista7 Digital Mixing System
Date printed: 27.08.03 SW V3.3 AutoTouch+ 5-95
5.11 Graphic Controller Automation
As discussed in the Switch Automation chapter, controls that are defined
in the VMC may be automated. While most of these controls are work sur-
face oriented, some controls are found only in the Graphic Controller.
Automated Items: Automatable items in the Graphic Controller are as follows:
• General Patch Connections
• Channel Patch:
- Input Selector
- Processor Block Order
- Dynamic Sidechain Link Setup
- Dynamic Sidechain Link Enable
- Dynamic Key Input Routing
- Direct Output Tap Location
- Meter Feed Tap Location
5.11.1 General Patch
Connections within the General Patch may be automated. Both “Make
Connection” and “Break Connection” operations may be stored as Static
objects or recorded as Dynamic objects. All types of General Patch con-
nections may be recorded.
Connection Behavior: The General Patch does not have dedicated automation controls. The cur-
rent global automation modes apply to the General Patch. The SW / SWIT
Pre-Selector must be used to select global modes.
General Patch connections follow the rules of a Press and Release switch
operation. Refer to chapter 5.10.3.1.

Studer D950 Specifications

General

Brand	Studer
Model	D950
Category	Music Mixer
Language	English