D950/Vista7 Digital Mixing System
Date printed: 27.08.03 SW V3.3 AutoTouch+ 5-15
5.2.2 Description
AutoTouch+ is a software and hardware package that is fully integrated
into Studer D950 and Vista digital audio mixing systems.
Software: AutoTouch+ is part of the V3.0 software package. V3.0 represents a major
revision to the D950/Vista system software and in addition to the overhaul
of the automation, it contains other new features and bug fixes that address
other parts of the system. There is also a set of ancillary software (much of
which is new) that supports system operations.
The AutoTouch+ portion of the V3.0 software provides a clear and easy to
use human interface. Its intuitive and uncluttered windows have control
and display elements whose labels and screen positions are obvious to
their purpose.
Hardware: AutoTouch+ requires a new Automation Master Panel. For current D950
users, the new panel will replace the old AutoTouch panel in both M2 and
Classic work surfaces. The panel is an integral part of the Vista desk sur-
face.
The Automation Master Panel integrates the software and work surface
aspects of the system. It also provides a logical and ergonomic interface
for the user.
User Release Notes: For details of the V3.0 package, please refer to the Studer D950 Version
3.0 User Release Notes. This document provides information regarding the
installation and use of the V3.0 software set. Details of AutoTouch+ is
provided in this document.
5.2.3 V2.5 vs. V3.0
AutoTouch+ is an evolution of the original D950 AutoTouch system. Be-
cause of this, operation of AutoTouch+ is very similar to V2.5 automation.
If desired, AutoTouch+ may be set up to emulate the operation of previous
versions.
Being a major revision, AutoTouch+ also goes well beyond the capabili-
ties of V2.5 or earlier systems. It permits the most complex automation
tasks to be carried out within a clear and logical workflow while remaining
straightforward and simple to operate.
5.2.3.1 New Features
There is an impressive array of new features built into AutoTouch+. A
summary of these features follows.
New Mix Management: Automation Mix files are managed via a new Mix Tree System (MTS).
The MTS will work in conjunction with the expanded Mix Pass Stack (8
Mix Passes). Each and every Mix Pass will be automatically saved and ar-
chived within the Mix Tree. Multiple Mix Trees can be created within a
Title. Any previous mix can become the Active Pass (or Read Mix Pass)
for a subsequent Record Mix Pass. The MTS is maintained between ses-
sions, so that when a mix is recalled days or weeks later, the entire Mix
To Next Page
Loading...
Need help?
General
