D950/Vista7 Digital Mixing System
5-118 AutoTouch+ SW V3.3 Date printed: 27.08.03
5.15.2 Read Lock
Read Lock forces all controls into Read and locks out all changes. While
in this mode, playing back the Read Mix data from the Active Pass is the
only operation possible. This assures the Active Pass will be played back
exactly as saved, which can be quite useful when printing a final mix or
layback.
The READ LOCK key is located at the top-left of the AutoTouch+ Panel and
will illuminate when engaged.
D950: Vista:
Conditions: With READ LOCK engaged, the following conditions exist:
• All controls are placed into the READ Control Mode and then locked in
READ. Only the stored values of the Active Pass will be heard.
Changes to control values are not possible. All controls are Protected.
• Changes may not be made to Static controls, the Channel Patch, or the
General Patch
• Control Mode changes are locked out
• Controls may not be placed in a Held state (TOUCH HOLD defeated)
• All Record functions are defeated (TOUCH RECORD, GLOBAL RECORD
PUNCH IN/OUT)
• All Audition functions are defeated
• SCENE RECALL / RCL is defeated
To Next Page
Loading...
Need help?
General
