D950/Vista Digital Mixing System
4-24 GC Operation SW V3.3 Date printed: 05.08.03
As soon as both cross-points have been made, the MIC CTL LED on the
corresponding console Channel Strip will be lit to indicate an established
connection (assuming the corresponding channel input has been selected).
F Tip Even if it appears complicated, this procedure really is quite simple.
As a rule, the Ext D19m mic/line pre-amp Target connections, as well as
most of the output patch cross-points, may have been factory-configured,
and saved as a Basic Preset, along with appropriate Labels and other useful
pre-fabricated settings. In some cases, your subsequent work will be based
on that Basic Preset. Unless your console’s layout needs to be radically re-
configured, you will probably never have to change this preset. In other
situations, multiple Presets (and possibly Session Configurations) will be
used to allow optimized configurations for a variety of applications.
To Next Page
Loading...
