D950/Vista Digital Mixing System
Date printed: 05.08.03 SW V3.3 GC Operation 4-67
So, after you have edited it, the Session Configuration from Example #2
(above) may be laid out in a different way:
In the example above, it is clearly visible that the six Masters have been
assigned to all layers of the first three Banks.
In other words: The Masters are always directly accessible, no matter
which of the first three Banks/Layers is currently selected.
F Tip In addition to Strip Setup, the Desk Channel Swap function can be used to
temporarily assign channels to the Channel Strips to suit your require-
ments.
Bank 2
Layer 1
Layer 2
Bank 3
Layer 1
Layer 2
Bank 1
Layer 1
Layer 2
In Mono 1 In Mono 2 In Mono 3 In Mono 4 In Mono 5 In Mono 6 In Mono 7 In Mono 8
Master 1 Master 2 Master 3 Master 4 Master 5 Master 6
AUX 1 AUX 2
Master 1 Master 2 Master 3 Master 4 Master 5 Master 6
AUX 3 AUX 4
In Mono 9 In Mono 10 In Mono 11 In Mono 12 In Mono 13 In Mono 14 In Mono 15 In Mono 16
In Stereo 3 In Stereo 4
Master 1 Master 2 Master 3 Master 4 Master 5 Master 6In Mono 25 In Mono 26In Mono 27In Mono 28 In Mono 29In Mono 30In Mono 31In Mono 32
Bank 2 / Layer 1 + Layer 2
Desk: 16 Strips
Session Config:
48 Mono inputs / 4 Stereo inputs / 6 Mono mast ers / 4 Mono AUX
Assigned layers: Bank 1 / Layer 1 + Layer 2
Bank 3 / Layer 1 + Layer 2
other Banks & Layers not assigned
In Mono 17 In Mono 18In Mono 19In Mono 20 In Mono 21In Mono 22In Mono 23In Mono 24
In Stereo 1In Stereo 2
Master 1 Master 2 Master 3 Master 4 Master 5 Master 6
In Mono 33 In Mono 34 In Mono 35 In Mono 36 In Mono 37 In Mono 38 In Mono 39 In Mono 40
In Stereo 1In Stereo 2
Master 1 Master 2 Master 3 Master 4 Master 5 Master 6
In Mono 41In Mono 42 In Mono 43 In Mono 44 In Mono 45In Mono 46In Mono 47In Mono 48
In Stereo 3 In Stereo 4
Master 1 Master 2 Master 3 Master 4 Master 5 Master 6