D950/Vista Digital Mixing System
4-134 GC Operation SW V3.3 Date printed: 05.08.03
in some sub-area. “Enable All” clears these exceptions and makes the
Surveyor work as usual. Inactivated sub-areas are always re-activated
upon system startup for safety reasons.
• OK: Clicking this button will close the Surveyor Page.
Surveyor Information: When it is initially opened, the Surveyor displays some information with-
out the need to open any directories or subdirectories:
• Computer Name: This field displays the name of the PC that is being
used to control the D950/Vista system;
• D950/Vista System: This is the main directory in the Surveyor, which
contains all of the other system element subdirectories. It’s name dis-
plays the D950/Vista software Application Release number (version)
and the Build number. This directory will always be open to show the
primary system element subdirectories (and their status) when the
Surveyor is opened;
• VMC Session Config: This item displays the currently loaded Session
Configuration file in a directory name format, such as: C:\D950SY-
STEM\VMC directory name\VMC name.vmc.
F Tip Other current system files (such as monitor files) may be found within the
Surveyor, but will be nested within subdirectories.
To Next Page
Loading...
Need help?
General
