D950/Vista7 Digital Mixing System
5-28 AutoTouch+ SW V3.3 Date printed: 27.08.03
3 Type the new name for the pass and click the “OK” button. The new Mix
Pass Name will appear in the Pass Name field and in the Mix Tree.
Mix Pass Notes: A set of notes can be entered and stored for each Mix Pass. Combined with
the Mix Pass Name, this can greatly benefit the organization of a large
number of passes.
Editing Mix Pass Notes: A Mix Pass must be the Active Mix Pass before notes can be entered or
edited. To enter or change Mix Pass Notes, use the following procedure:
1 Make the desired Mix Pass the Active Pass if it is not already. (Click its
icon in the Mix Pass Stack or double-click its icon in the Mix Tree.)
2 Click the “Pass:” button next to the current Mix Pass Name (to the right of
the Mix Pass Stack). The Pass Info entry box will appear. See #2 above.
3 Type the new notes in the “Notes:” field and click the “OK” button. The
first few lines of the new Mix Pass Notes will appear in the AutoTouch+
window whenever that Mix Pass becomes active. If the notes are lengthy,
the complete set may be viewed by opening the Pass Info entry box.
To Next Page
Loading...
Need help?
General
