D950/Vista7 Digital Mixing System
Date printed: 27.08.03 SW V3.3 AutoTouch+ 5-103
As with any control, changes to menu items may be auditioned.
Record a Menu Item Change: To automate a menu item, use the following procedure:
1. Select the desired global Control Mode. Write will overwrite previous
changes, both location and connection type. Trim will allow the loca-
tions of changes to be moved without changing connection types.
2. Select TOUCH RECORD.
3. Select the desired “Write To:” function.
4. Open the appropriate GC menu and select the desired item.
5. Perform desired operations to be automated.
6. At the time the desired operation is performed, AutoTouch+ will
punch-in. The new item state will persist until the “Write To:” condi-
tions are met or a Global Punch-out occurs. (trimmed status will persist
until the Next Change by default.)
7. Upon punch-out a new Mix Pass will be created.
Note: Like any other object within AutoTouch+, menu items are Static objects
until a change state is recorded in the system. Therefore, menu items may
be updated in the same manner as any other Static control.
To Next Page
Loading...
Need help?
General
