D950/Vista7 Digital Mixing System
5-106 AutoTouch+ SW V3.3 Date printed: 27.08.03
3. Once controls have been selected for Protection, click “Apply” or
“OK” at the bottom of the object picker (OK will close the picker, Ap-
ply will keep it open). A temporary Protection Set will be created and
made the current set. “Current Protection Set **Modified**” will ap-
pear in red above the current set field to indicate changes have been
made to the current set. (As in the previous example, the Mutes on
channels 1-12 would constitute the **Modified** set.)
To Next Page
Loading...
