D950/Vista7 Digital Mixing System
Date printed: 27.08.03 SW V3.3 AutoTouch+ 5-115
Scene Recall: Pressing the SCENE RECALL / RCL key will “recall” the Scene stored in the
first buffer. Holding AUTO MODE modifier key and pressing the SCENE
RECALL / RCL key will recall the Scene stored in the second buffer.
When a Scene is recalled, the controls on the list come back Held and
WRITE Enabled. The values for the controls in the buffer will be rein-
stated as well. If Touch Record is active, the controls in the list will punch-
in to RECORD upon Scene Recall
Clearing a Scene Buffer: Holding the Global Record CLR / ALL key and pressing the SCENE RECALL
key (D950) or CLR / ALL and RCL (Vista) will “clear” a Scene in the first
buffer. Holding Global Record CLR / ALL and AUTO MODE and pressing
SCENE RECALL / RCL will clear the second Scene buffer.
Note: The data in the Scene Buffer is not saved as part of a Mix Pass, Mix Tree,
or Title. Therefore, it will not persist from session to session.
To Next Page
Loading...
