Studer D950 User Manual

D950/Vista7 Digital Mixing System
Date printed: 27.08.03 SW V3.3 AutoTouch+ 5-143
Highlight and Type: • Highlight all or part of the entry field (hours, minutes, seconds, and
frames may be selected individually or as a group);
• Type in the desired timecode value (colons are not necessary when
typing);
• Press Enter.
Highlight and Roll: • Highlight all or part of the entry field;
• Click and drag (roll) the value up or down; an upward trackball motion
will increase the timecode value, and a downward motion will decrease
the value;
• Stop at the desired value and press Enter.
+/– From Existing Time: • Press the + or – key from the computer keyboard, and an additional
Timecode Entry Field will appear;
• Using one of the highlight methods above, enter a timecode value;
• Press Enter. The math to add (+) or subtract (–) the entered value
to/from the existing timecode will be applied. The result of the math
will be entered as the new timecode address.
Right-Click Menu Selection: • Right-click any part of the entry field;
• A menu of timecode address selections from which to choose will ap-
pear;
• Use the click/drag method to select a timecode address included in the
menu.
The items contained within the Right-Click Timecode Menu are as fol-
lows:
Mix/Timecode Items: • Mix Begin: This is the first timecode address within the selected mix
(the selected mix is the open mix that has been chosen with the tabs at
the bottom of the Object Picker or Mix Viewer); clicking the “In” but-
ton while holding the AUTO MODE key performs the same function.

Studer D950 Specifications

General

Brand	Studer
Model	D950
Category	Music Mixer
Language	English