D950/Vista7 Digital Mixing System
Date printed: 27.08.03 SW V3.3 AutoTouch+ 5-195
Locate System on Standing Code: <Never>: AutoTouch+ will never locate to a standing timecode location.
<Always>: AutoTouch+ will always locate to a standing timecode loca-
tion.
<After>: AutoTouch+ will locate to a standing timecode location after the
time specified by the millisecond pull-down menu.
Other Miscellaneous Options: <Read Safe>: Normally when a control is moved its changed value is able
to be auditioned, and then it snaps back to the Read Mix value (unless
Touch Hold is active). When this option is set, any controls in READ
mode will NOT be able to be auditioned, they will always follow the read
mix value regardless of the physical or virtual control position
<Disable Trim Replay>: When this option is selected, faders will NOT
play back any recorded Trim data. Note that this has no effect on the mix
values that are being played from the read mix. Only that the faders will
not track the any previous Trim values that were recorded. The Read Mix
values already contain the effects of any previously recorded TRIMs. So
this only affects how the faders respond when they are in TRIM enable
mode. Also note that TRIM replay is only available on faders.
To Next Page
Loading...
Need help?
General
