Studer D950 - Page 544

D950 Digital Mixing System
6-14 System Administration SW V3.3 Date printed: 05.12.03
3000=Lost Communication With UPS
3001=UPS Output Overload
3002=UPS Self-Test Failed
3003=UPS Battery Is Discharged
3004=Comm Lost While On Battery
3006=Abnormal Contact Position
3010=Check Smart Cell Signal
3013=UPS On Bypass: Failure
3014=Base Module Fan Failure
3015=Base Power Supply Failure
3016=Battery Needs Replacing
3100=Ambient Temp Out Of Range
3101=Humidity Out Of Range
[ Email ]
Password =
[ LineFail ]
NotifyDelay = 1
NotifyInterval = 60
NotifyRepeat = Yes
ShutdownDelay = 300
Actions = LUS
NotifyType = Some
NotifyUserList = industrie8
[ PrepareForShutdown ]
NotifyDelay = 0
ApplicationShutdownEnabled = Yes
ShutdownDelay = 30
NotifyType = Some
NotifyUserList = industrie8
NotifyRepeat = No
[ industrie8 ]
NotificationAddress = industrie8
EMailAddress = industrie8
NotificationEnabled = Yes
[ EventUsers ]
Users = industrie8
[ LineGood ]
NotifyType = Some
NotifyUserList = industrie8
NotifyRepeat = No
[ SelfTestPassed ]
Actions = LU
NotifyType = Some
NotifyUserList = industrie8
NotifyRepeat = No
[ LowBattery ]
NotifyType = Some
NotifyUserList = industrie8
NotifyRepeat = No
[ BatteryDischarged ]
NotifyType = Some
NotifyUserList = industrie8
NotifyRepeat = No
[ ReturnFromBatteryDischarged ]
NotifyType = Some
NotifyUserList = industrie8
NotifyRepeat = No
[ CommunicationLost ]
NotifyType = Some
NotifyUserList = industrie8
NotifyRepeat = No
[ CommunicationLostOnBattery ]