Studer D950 - Page 551

D950 Digital Mixing System
Date printed: 05.12.03 SW V3.3 System Administration 6-21
[comment]
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!! 1.2.2. Input/Output Cards (Panels)
!!
!! A section defining an input/output card (panel) has a name of the form: ["CardIO_"Type].
!! The section contains some general parameters (InputStatusLength, NumOfCtrlElements,
!! LedStatusLength, AlphaStatusLength, NumOfDsplElements) specifications of control
!! elements and of display elements on the panel.
!! A control element is described by the type (button or pot), it's possition in the
!! panel status data (byte and bit numbers or byte number and size) and a short name.
!! The short name and a specific card name, defined in the section [CARDS], are used
!! for building the control identification name (e.g. CID_CRIN_IN2). These names are
!! later used to connect to functions.
!! A display element is described by the type (led or alpha), it's possition in the card
!! status data (byte and bit numbers or byte number and size) and a short name. The short
!! name and a specific card name, defined in the section [CARDS], are used for building
!! the display identification name (e.g. DID_CRIN_IN2). These names are
!! later used to connect to functions and build display groups.
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
[CardIO_D19mRcc]
InputStatusLength=1
NumOfCtrlElements=8
!!--------type/offset/pos or size/name!!
C_0=button/0/0/OPTO00
C_1=button/0/1/OPTO01
C_2=button/0/2/OPTO02
C_3=button/0/3/OPTO03
C_4=button/0/4/OPTO04
C_5=button/0/5/OPTO05
C_6=button/0/6/OPTO06
C_7=button/0/7/OPTO07
LedStatusLength=1
NumOfDsplElements=8
!!--------type/offset/pos or size/name!!
D_0=switch/0/0/IN0
D_1=switch/0/1/IN1
D_2=switch/0/2/IN2
D_3=switch/0/3/IN3
D_4=switch/0/4/IN4
D_5=switch/0/5/IN5
D_6=switch/0/6/IN6
D_7=switch/0/7/IN7
[CardIO_SignalInput]
Type=9
InputStatusLength=4
NumOfCtrlElements=24
!!--------type/offset/pos or size/name!!
C_0=button/0/4/OPTO00
C_1=button/0/5/OPTO01
C_2=button/0/6/OPTO02
C_3=button/1/0/OPTO03
C_4=button/1/1/OPTO04
C_5=button/1/2/OPTO05
C_6=button/1/3/OPTO06
C_7=button/1/4/OPTO07
C_8=button/1/5/OPTO08
C_9=button/1/6/OPTO09
C_10=button/2/0/OPTO10
C_11=button/2/1/OPTO11