D950 Digital Mixing System
Date printed: 03.09.03 SW V3.3 Technical Specs 8-11
D19m DEMUX frame:
Typical power requirements: 100...120 V or 200...240 V, 50/60 Hz, 100...200 W, depending on the number of cards
Analog line output on D19m C4DA card:
4 outputs per card, 24 bit delta-sigma converter
Output impedance: <40 Ω, electronically balanced
Output level @ 0 dBFS: 15/21 dBu fixed/0...26 dBu adj.
Frequency response, –0.2 dB: 30 Hz...20 kHz
THD + N, @ 1 kHz, –30 dBFS: < –110 dBFS
Crosstalk @ 1 kHz: < –110 dB
Sampling frequency range: 30...54 kHz
AES/EBU output on D19m AESO card (alternately to AES/EBU outputs on the DSP cards):
2 balanced AES/EBU outputs per card, compliant to AES3-1992 (ANSI S4.40-1992)
MADI input on D19m MADI card: Fibre optic MADI input on SC connector, compliant to AES10-1991 (ANSI S4.43-1991)
To Next Page
Loading...
