Toptech Systems MultiLoad II User Manual

Chapter 9 – Weights & Measures
312
Firmware Version 3/4.31.37
D2=Volume weighted average Density measured OR specified for meter M2
De=Density specified for the Ethanol component
Nem=Net volume loaded for Ethanol Meter
VCFe=API Correction Table for Ethanol
Mem=Mass loaded for Ethanol Meter
Ethanol product (Component Level) values are reported as:
Ge=Gem (value not to be used for trade)
Te=Tem (value not to be used for trade)
De=De’ OR Dem
Ne=Nem (value not to be used for trade)
Me=Mem (value not to be used for trade)
Where: Ge=Gross volume loaded for the Ethanol component
Te=Temperature for the Ethanol component
De=Density for the Ethanol component
De’=Density specified for the Ethanol component
Ne=Net volume loaded for the Ethanol component
Me=Mass loaded for the Ethanol component
Regular product (Component Level) values are reported as:
Gr=Grem-Ger (value not to be used for trade)
Tr=((Trem * Grem) – (Ter * Ger)) / Gr (value not to be used for trade)
Dr=Dr’ OR
Dr= ((Drem * Grem) – (Der * Ger)) / Gr (value not to be used for trade)
Nr=Nrem-Ner (value not to be used for trade)
Mr=Mrem-Mer (value not to be used for trade)
Where: Gr=Gross volume loaded for the Regular component
Ger=Gross volume loaded for the Ethanol component while flowing Regular/Ethanol
Tr=Temperature for the Regular component
Ter= Volume weighted average temperature for the Ethanol component while flowing
Regular/Ethanol
((Trem * Grem) – (Ter * Ger)) / Gr=Back calculated average temperature for the Regular
component
Dr=Density for the Regular component
Dr’=Density specified for the Regular component
Der=Volume weighted average Density for the Ethanol component while flowing Regular/Ethanol
((Drem * Grem) – (Der * Ger)) / Gr=Back calculated average density for the Regular component
(see Preset Level Parameter Compute Blend Density)
Nr=Net volume loaded for the Regular component
Ner=Net volume loaded for the Ethanol component while flowing Regular/Ethanol
Mr=Mass loaded for the Regular component
Mer=Mass loaded for the Ethanol component while flowing Regular/Ethanol
Premium product (Component Level) values are reported as:
Gp=Gpem-Gep (value not to be used for trade)

Toptech Systems MultiLoad II Specifications

General

Brand	Toptech Systems
Model	MultiLoad II
Category	Control Unit
Language	English