Firmware Version 3/4.31.37
Updated software copyright year.
Corrected scaling and update bug in meter and additive analog output diagnostic
screens.
02/21/12 WJP
Updated the following API table defs for integration with new TMS5 bay code.
TABLE_54CG = 'K',
TABLE_54XG = 'L',
TABLE_54YG = 'O',
02/21/12 WJP
Increased Message Log from 100 to 750 messages.
For non-PXA255 builds, added ability to save 90 days of message log files to the
SD Card.
Each day will be saved into a separate file in the root directory.
Attempts to save to the SD Card will be aborted after 5 consecutive failed
attempts to save to the SD Card.
On startup or after a reboot, Saving to the SD card will resume.
For UAP or CN builds, added ability to send message log lines to TDS.
Added internal reference number to all log messages.
02/22/12 WJP
Updated transaction processing to store any authorized component or additive in
transaction, even if flow volume is zero.
Corrected recent bug with additive normal piston switch feedback, incorrectly
configuring the FCM version 14 or greater for inverted piston switch input.
On R910 message log register, max two digit counters to 99 for values over two
digits.
02/24/12 WJP
Now storing the target additive volume in the net field of the additive
transaction detail record.
Updated the view transaction archive screen to display the additive target and
delivered volume.
Updated the view transaction archive screen to display the currently configured
VCF table for each component.
2/28/12 WJP
Added additive target volume and percent deviation to Alibi Log output.
3/3/12 WJP
Added log file cleanup and resync when writes to the SD Card are interrupted
(power cycle).
TODO: Delete oldest log file when free space is limited.
TODO: Develop design on time zones on time sync updates from TDS.
3/6/12 MSH
Added support in web server for download of files from SD card.
Added logging of user input/selections during prompting sequence.
CN builds: Added download of CN specific databases, including locomotives,
vendors, vendor BOLs, and drivers.
3/18/12 WJP
For UAP Builds, increase BOL max lines from 80 to 4 pages (66*4).
For SIMULATION builds, added \r to diagnostic output for new Cygwin terminal.
Corrected minor compiler warnings.
For UAP Builds, added LUA script processing for multipage BOL generation.
To Next Page
Loading...