Firmware Version 3/4.31.37
Updated FCM, PCM and Krohne Mass Meter polling logic to wait 8 seconds before
retrying after lost communications.
This will ensure that any FCM flowing product or with outputs on will stop flow
and drop all outputs.
5/10/12 WJP
Removed CTS check on PTB Alibi Log Printers.
5/15/12 MSH
CN builds: Addressed ISS_2045 "Vehicle not archived with transaction" which
affected transload to truck operations
5/16/12 WJP
Added RCU configuration parameter Trace UAP Level (0=minimal logging, 1=, 2=, 3=,
4=inc low level logic, 5=inc low level com).
Added low level logging to the UAP product authorization processing.
5/16/12 WJP
Added Disabled field to UAP TDSClientProducts struct (to be removed again).
Fixed issue where UAP local database edits did not mark DB as dirty.
Corrected null error issue with UAP AuthorizeTransaction() when using Prox Cards.
Bug with UAP Update Saleable Products where Prod ID was checked as Prod Type.
Added UAP Preset Authorized Products functionality to include all saleable and
base products when no records are present in the PAP table.
5/17/12 WJP
Removed Disabled field from UAP TDSClientProducts struct.
5/18/12 WJP
Updated UAP processing of TDSClientProducts component percent field to contain a
decimal point in 000.0000 formats.
6/1/12 WJP
Updated UAP processing of UAP meter_type field to use P(Product) and A(Additive)
instead of C(Component) and A(Additive).
Updated UAP processing of UAP prod_type field to use 1(Product) and
2,3,4(Additive) instead of C(Component), A(Additive) and S(Saleable).
06/11/12 WJP
Added separate monitoring per port of non_toptech_host connections.
06/29/12 MSH
UAP - Updated base product process to use comp_add_id rather than meter_id when
assigning products/components to meters.
07/03/12 MSH
Added two new passwords: 4448 to jump to the view totalizers menu (for
transmontagne), and 4447 to jump to the view transactions screen (for CN).
07/05/12 WJP
Added prototypes to ml_pm_view.h to remove compiler warnings.
Corrected var naming of uap_comp_add_id.
Corrected additive volume in uap transaction record to include three decimal
places.
07/09/12 MSH
Version number increased to 3/4.31.06 in anticipation of release.
To Next Page
Loading...