Firmware Version 3/4.31.37
Added Mass to the Web Server Transaction Detail Viewer.
Added Mass to Alibilog only saleable product(will not print when Mass is ZERO)
Added new mass totalizer to Totalizer Screen
Added new register R114 to read real-time Mass Totalizers
Added real-time preset gross/net/mass totalizers to CONTROL SCREEN
Added new mass_measured_used_type on RCU Level
Added new mass_measured_used_type to r133 Register
Added new alibilog labels for mass
Added new ml_weight.c
Added Mass on Preset Screen
Added Mass on Component Screen
Enhanced Deliver in Net Parameter to Deliver_type (Gross or Net or Mass)
Added new deliver_type to r133 Register
Added new message on Preset Screen (Volume_unit) corrected to (Mass_Unit)
Added all previous change for Mass also in hundredths mode
Added routine to go from weight_to_net and net_to_gross
Added routine to go from measured_unit to mass_measured_unit (mass units in the
measured_unit are out of scope)
Updated all Meter_Type for volume and mass totalizer calculations
Added Date to the Preset Control Screen (Mode DD/MM/YYYY or MM/DD/YYYY)
Fixed bug for alibilog when in hundredths mode that the decimal points would be
not converted to comma only saleable level
Moved Time on Preset Control Screen next to the date value
Enhancement on EOD-Report include now also Mass Totalizers and Throughput
Fixed bug in EOD-Report if more than 1 meter per arm was assigned , report would
loop multiple times
Added new throughput totalizers (auth + unauth volume) for Gross, Net, Mass
Added Mass calculations when using online density/relative/API Gravity instead of
using
- Mass = (Net * Dens) we will use Mass = (Gross * Dens)
Added DINISO rounding routines for weight
When not loading in hundredths net and mass gets calculate from whole values
Added new Mass Calculator Screen (starts from Net volume to Mass)
Added Mass to Custom Logic Preset and Component Level
Added missing net hundredths level to clear reset (component level)
4/17/2013 WJP
Fixed bug in UAP bol processing where sometimes the header lines would not get
copied to other pages.
Corrected bug in UAP BOL default script where one detail line on the start of new
pages was lost.
Updated UAP BOL default script to add a dividing line under the column headers
and after all column data to help readability.
Updated UAP BOL default script to keep all footer lines on the same page.
4/18/2013 WJP
Global rename of “throughput” totalizer to "alibilog_daily_gross_del".
With mass delivery as an option, clarify some global fields across source files:
To Next Page
Loading...