Firmware Version 3/4.31.37
Global rename batch_volume_del to batch_del.
Global rename volume_preset_whole to preset_whole.
Global rename load_volume_del to load_del.
Global rename batch_volume_ to batch_.
4/22/2013 WJP
Increased resolution of transaction temperature from tenths to hundredths.
Updated view transactions and web transaction viewer to display temperature in
hundredths.
Added temperature in hundredths to the end of the R800 and MRTD commands as
%05d (implied 2 decimal digits).
Kept existing transaction temperature reads in tenths for backward
compatibility.
Kept existing TDS transaction detail temperature field in tenths for backward
compatibility.
04/24/2013 PS
Store Mass Totalizers for each loaded Batch
Added to Transaction Viewer the Mass Totalizer
Added to Web interface the Mass Totalizer
Fixed Hundredths totalizers in Web interface would show whole totalizers
Added Mass Totalizers to Alibi Log
Added to Unauthorized flow voucher the mass value
Added to Ticket Printer in Standalone the mass totalizers (not for UAP)
04/25/2013 PS
Added check when delivery type is mass that the mass measure used cannot be NONE
Added check when delivery type is net or mass that the measure used cannot be
NONE
04/27/2013 WJP
Updated U700 so language index 0 is used before any other language indexes
(1..MAX_LANG) to maintain backwards compatibility.
Added new card_reader_types to support non-captive card readers and ibutton
readers.
Added new U700 strings to support "Swipe Card" and "Touch iButton" messages.
04/28/2013 PS
Added iButton routine to read the iButton Reader, also updated the keypad
firmware v003.
Added new diagnostic screen to see ibutton reader data, with read counter.
Added iButton animation on the IDLE Screen
04/28/2013 WJP
Added support and card reader types for noncaptive card readers (India Req.).
Changed Driver Card Number from an Integer to a String for iButton Support.
Manual entry of Card Numbers (Access ID setup and Card Reader Disabled) zero pads
numbers.
To Next Page
Loading...